9600 baud 8 bit no parity 1 stop trans delay 0/char 0/line
no flow control

crc2.com, waited 20 seconds before send of file

end of code at 15CH. 

crc3.com, waited 10 seconds before send of file

end of code at 15CH.
 
crc4crc.com, waited 15 seconds before send of file

end of code at 25CH

crc5.com waited 25 seconds? before send of file

end of code at 15CH

crc6.com waited 20 seconds

end of code at 25CH

crc7.com waited 25 seconds

end of code at 15cH

crc8.com waited 10 seconds

end of code at 15Ch

crc9.com waited 15 seconds

end of code at 25cH

Ran CRC4.COM!!!!

>crc4 crc4.com
CRCK ver 3.0
--> FILE:  CRC4    .COM         CRC = E7 99
DONE
a>crc4 crc6.com
CRCK ver 3.0
--> FILE:  CRC6    .COM         CRC = E7 99
DONE
a>crc4 crc9.com
CRCK ver 3.0
--> FILE:  CRC9    .COM         CRC = E7 99
DONE
a>

Ran CRC9, same result