Osc board 2-31 85-1290-1

C1, C2, C3  0.022uf
C4 0.0022uF
C5,C6 = 0.1uF 100v Z5U ceramic 
C7 100uF 50V
D1 1N4004
R1, R2 390
R3 470K
R4, R6 2.2K
R5, R7 4.7K
R8, R9 2.2K
R10 220K
R11 390
R12 2.2K 1W
R13 dual 10K pot.
Q1 2N3393
Q2 Q3 Q4 2N3393

(PS: if one accidentally connected the +180v supply to
the sine or square wave output, it would probably break
down C5 or C6 and blow up the osc. board) 

Pwr board 2-32 85-1289-1

D1, D2, D3, D4 1N4004
D5, D6 1N4004
D7 1N4752A 33V 5% 1W zener
D8 1N4739 9.1V 5% 1W zener
F2 0.5A 3AG (may have been added)
C1 0.1 uF
C2 1000uF 50V
C3 10uF 50V
C4 0.1uF
C5 100uF 250V
Q1, Q2 2N3393 repl. 2N6014
Q3 2N3859 repl. 2N6014
Q4 417-175 replaced w/TIP31C
R1 470
R2 1K  
R3 4.7K
R4 270 1W
R5 330 1W
R6 1K pot.
R7 39K 1W

other parts

T1 7-62 220-1 60-7330
   6.3V-0-6.3V, 150V, 33.6VAC tapped at 13.5V
T2 audio 3.2 ohm spkr to 400/4K imped
F1 1A 3AG
S1 3 poles 3 pos off/6V/36V

Screws for panel are #8-32 sheet-metal, replaced with Phillips screws

Specs as tested:

180V DC output  - 200V no-load, 186V @18mA on 10K load
6.3-0-6.3 AC    - 15.2V no-load, 13.7V 1 amp

0-6/0-30V DC
   at 6V setting 1.2-7.0V no load
   at 5V 0mA, 4.83V @ 200mA
   at 30V setting 1.4-30V no load
   at 24V 0mA, 23.6v @170mA

sine/square output 7VAC, 350 Hz - 2.2kHz